How Do You Make Turbo Engines More Efficient? Just Add Water

How Do You Make Turbo Engines More Efficient? Just Add Water

- in Automotive
98
0

BMW is using a version of Bosch’s WaterBoost technology in its high-performance M4 GTS. BMW officials said they liked the results.

Credit
BMW

FOR decades, automakers have relied on turbocharging, which uses energy captured from exhaust gases to force additional air into the cylinders, to increase the power and efficiency of some gasoline engines.

But turbocharged engines are in a bind, caught between increasingly stringent fuel economy and emission standards and consumers unwilling to sacrifice performance to achieve those environmental benefits.

That’s why a prominent automotive supplier has developed a counterintuitive technology that could enhance turbocharged engines for passenger cars by improving fuel economy with no reduction in power.

How? By spraying water into the cylinders as the engine is operating.

The basic principle is that by cooling combustion temperatures and reducing the tendency of the fuel-air mixture to fire erratically, water injection allows engineers to increase an engine’s compression ratio, or reduce engine size, that way increasing its efficiency. The developer, the German auto supplier Robert Bosch, calls its system WaterBoost.

It is not a new concept. Water-injection technology came to prominence during World War II, when it was used to enhance the performance of supercharged, piston-powered fighter planes during takeoffs and strenuous combat maneuvers.

Water injection made another appearance in one of the first turbocharged production cars, the 1962 Oldsmobile Cutlass Turbo Jetfire, where, instead of the sophisticated antiknock sensors that are standard equipment in modern cars, a mixture of water and methanol was added to the air-fuel mixture to control combustion.

Water injection appeared again in the 1980s in some turbocharged Formula One cars, which did much to burnish turbocharging’s public appeal.

Bosch says that water injection, simulated in this computer-generated image, improves fuel efficiency, particularly when accelerating quickly.

Credit
Bosch

But the approach has never caught on for mass-market automobiles.

Whether it can take hold now is a big question for Bosch. But BMW, one of Bosch’s customers, is already using a version of the technology in its high-performance M4 GTS cars, and company officials said they liked the results. It was Bosch’s involvement in BMW’s project that led Bosch to develop WaterBoost as a stand-alone product.

“We are highly convinced about the performance of the M4 GTS and very delighted about the enthusiastic feedback we get from our customers,” Dirk Haecker, vice president of engineering at BMW’s M Division, wrote in an email exchange. Mr. Haecker said BMW was considering adopting the water-injection technology for other of its M-series cars.

But Bosch, which plans to have a commercial version of WaterBoost available by late 2019, faces some market challenges.

The drawbacks include the need for carmakers to redesign the intake ports and many other components of their turbocharged engines, and the need for consumers to periodically refill a tank with distilled water. And some experts predict that other less disruptive technologies will emerge that can bring similar efficiency gains to turbocharged engines.

“If today’s turbocharging were the future technology, I would say it is likely that manufacturers will pick this up in the future,” said John German, a senior fellow at the International Council on Clean Transportation, an independent nonprofit group. “But it’s the potential to achieve similar efficiency improvements in other ways that I think is the biggest challenge to WaterBoost technology, in ways that don’t require the consumer to refill the water tank.”

Bosch says WaterBoost can reduce fuel consumption by as much as 4 percent in regular driving conditions and by as much as 13 percent in high-load situations, like accelerating on a freeway or making long uphill climbs.

While Bosch had extensive experience in the development of water-injection systems for motor sports, where minimizing weight and maximizing performance are the primary considerations, developing a version suitable for passenger cars presented a challenge.

Dirk Haecker, vice president of engineering at BMW’s M Division, says the company was considering adopting the water-injection technology for other of its M-series cars.

Credit
BMW

“Systems for racecars are really different than for passenger cars,” said Martin Frohnmaier, general project manager at Bosch. “For passenger cars you need to focus much more on endurance, much more on durability and so on.”

The power of modern turbocharged engines is limited by a number of variables, including knocking and heat stress on the exhaust components. By cooling the fuel-air mixture under high-load conditions, water injection reduces the knocking tendency and also reduces the need to inject additional fuel into the cylinders to protect the exhaust components through evaporative cooling. This allows the engine to produce more torque without a corresponding increase in fuel consumption.

While BMW seems to be focused on using water injection as a means to increase performance, Bosch sees an opportunity for a much broader application of the technology aimed at meeting environmental goals.

“We see water injection as very important technology to help our customers reach their emissions targets in the near future,” said Fabiana Piazza, head of project management at Bosch.

Ms. Piazza declined to speculate on what WaterBoost would cost automakers — and ultimately, car buyers — saying that the specifications of the system, and the complexity of incorporating it into their vehicle lines would vary.

While Bosch says that WaterBoost is fully tested and plans to start production in 2019, how the system will fare in the marketplace is still a question. A number of other technologies under consideration — including cooled exhaust gas recirculation, variable compression ratio and something known as the Miller thermodynamic cycle — might also reduce fuel consumption of turbocharged engines by 3 to 5 percent.

It is too early to know whether water injection would have the same impact on fuel economy in turbocharged engines outfitted with one or more of these other technologies.

“A lot depends on its synergies with these other technologies,” said Mr. German of the International Council on Clean Transportation. “Right now, with the current, relatively unsophisticated turbocharged systems, water injection should be quite effective. But will it still be effective as turbocharged engines become more sophisticated and efficient?”

Continue reading the main story

Source link

Leave a Reply

Your email address will not be published. Required fields are marked *

You may also like

S&P 500 Posts Biggest Decline in Three Months on Washington Worries

With valuation levels considered high in many stocks,